Corn Puffed Extruder Machine-manufacture,factory,supplier from China

Puffed food appeared in the market in the 1960s. Later, it quickly became popular in various countries because of its unique taste, simple eating and various patterns. It has long occupied the most frequently purchased snack types with chocolate, wafers and other foods.However, the long-term sales advertisements and puffed food have left us with a stereotyped image. Recently, many consumers said that when they saw the product category as "oil-containing puffed food", they were very worried about whether it was an unhealthy snack.

1. Before operating the corn equipment bulking machine, remove the head, movement, lead screw and other parts, clean them up, dry them and then install them.2. Idling for 1 to 2 minutes first when operating, put the raw materials into the feed mouth, not too fast, when the ring groove of the spiral shaft head is filled, stop feeding, friction preheating. Wait until the nose temperature rises and the pressure inside the cabin builds up before feeding.3. Feed should be continuous and uniform, material must be dry, must pay attention to.4.

As a food processing equipment, the food extruder has many precautions in use. For example, we need to remove the machine head, movement and lead screw before starting the operation, and we must carefully clean the rice on the machine. dirt and oil, and then re-installed. Only in this way can the material reach the required state and quality. So in the process of Jinan puffing extrusion equipment operation, what should we pay attention to?Matters needing attention during the operation of the extruder are:1. Mainly use corn and potatoes as raw materials to produce small food.2.

Extruder belongs to a kind of equipment for processing puffed food. It is a kind of equipment for processing puffed food, such as processing rice, corn, soybean, wheat, etc., in daily life.

Working Principle of Twin Screw ExtrusionAfter a certain amount of pulverization, the material with a certain water content is fed into the extruder cavity, so that the material will undergo mixing, shearing, A series of complex continuous processes such as melting, curing and sterilization. Because there is a certain air pressure difference inside and outside the barrel, the moment the material is extruded, the external pressure it is subjected to is reduced to normal pressure, so that the material is instantly puffed.

Screw extruder is mainly used in the production of starch extruded food, protein extruded food and extruded feed in the food industry, and can also be used as a special chemical or biochemical reactor.Starch puffed foodThe starch in the grain will gelatinize (αize) under the high temperature and pressure of the extruder. The results showed that the degree of starch αization was more than 98% and the crude fat decreased by 60% or even disappeared after the puffed corn flour. Water solubility increased by more than 40%. Therefore, extruder can replace roller dryer to produce gelatinized starch.

Food puffing machinery production line mainly uses potato starch, corn starch, flour as raw materials, using a unique extrusion molding process, the production of the popular market of various shapes of the secondary puffed food. Mechanical production line design is reasonable, high degree of automation, accurate extrusion parameter control. The main machine is equipped with high and low pressure screw, which increases the scope of use of raw materials, reduces cost and improves product quality.

For extruder equipment, the model specifications of extruder equipment are classified according to the diameter of the screw. For the sake of explanation, plastic is used as an example below, but the same is true for food extruders.That is to say, the screw diameter of the extruder equipment is the model specification of the extruder equipment. For example, the screw diameter of the 90-type extruder equipment is 90mm.

Series double screw extruder introduction:1, mainly by the feeding system, extrusion system, rotary cutting system, heating system, lubrication system, control system.2, extruder feeding system, main drive system, rotary cutting system all adopt frequency control, strong power, smooth operation, power saving.3, automatic lubrication, forced cooling, to ensure the safe operation of the extruder and prolong the life.4, screw alloy material, through special processing, high strength, wear resistance, increase the service life.5, according to different products, with different structure and length

The extruder has the functions of compression, mixing, kneading, melting, puffing and molding. The cavity of the extruder can be divided into 3-5 zones. Each zone can be heated by steam or electricity, or by extrusion friction, so as to achieve the purpose of cooking the material. Under the action of high temperature and high pressure in the cavity, the starch Gelatinization, protein denaturation. When the material passes through each zone of the extruder cavity, soluble flavor substances and pigments can be injected into the material through the cavity under high pressure.