Fried Snacks Machine-manufacture,factory,supplier from China

(Total 24 Products for Fried Snacks Machine)
Tortilla chip technique line uses corn powder, corn starch, and rice powder as primary cloth which may be extruded, punched into triangle, spherical, rectangular shapes, after which baked and flavored. such snacks with crispy taste, wealthy vitamins and digestible form are very famous with many human beings everywhere in the worldwide.
  Contacta ahora
Frying machine using advanced oil and water integration technology, to overcome the shortcomings of the traditional frying machine, automatic filtration, can maintain the clean frying oil, the consistency of the letter fried products, not only improve the quality of products, extend the shelf life, but also bring higher added value for products.Due to the characteristics of cooking oil, when the temperature reaches 360 to 366 degrees Celsius, the oil in the pan starts to spontaneously ignite, and the temperature reaches 400 degrees Celsius for a short time.
  Contacta ahora
Breadcrumb is mainly used for fried beefsteak and chicken as frying dressing. this line is especially designed and developed to perform from the fabric to very last shaping routinely with less manpower, with out waste,lower production price, and higher manufacturing efficiency.
  Contacta ahora
Twist Snacks Making Machine uses corn powder, corn starch, and rice powder as most important cloth which can be extruded, punched into triangle, spherical, rectangular shapes, after which baked and flavored. such snacks with crispy flavor, wealthy nutrition and digestible shape are very famous with many people all around the global.
  Contacta ahora
Fried Wheat Flour Snacks Making Machine  makes use of corn powder, corn starch, and rice powder as maximum crucial fabric which may be extruded, punched into triangle, spherical, square shapes, and then baked and flavored. such snacks with crispy flavor, rich vitamins and digestible form are very well-known with many humans everywhere in the global.
  Contacta ahora
Fried Wheat Flour Snacks Making Machine  uses corn powder, corn starch, and rice powder as most important cloth which can be extruded, punched into triangle, spherical, rectangular shapes, after which baked and flavored. such snacks with crispy flavor, wealthy nutrition and digestible shape are very famous with many people all around the global.
  Contacta ahora
This unmarried -screw fried wheat flour snack processing line makes use of wheat flour as raw fabric that is extruded and formed by means of the single- screw extruder. the snack might be in specific shapes by means of converting the moulds, such as pizza rolls, shell, screw, ring, big name, chip, stick, and many others. after fried and flavored, the very last snacks will be crispy and engaging.
  Contacta ahora
This puff snack making device can use corn, rice, and other grain powder as raw substances to provide immediately puffed snacks in variou shapes, along with chip, ball, ring, stick, flake, flower, and so forth. after dried and flavroed, the snacks are crispy and tasty which are very popular inside the marketplace.
  Contacta ahora
This process line adopts advanced share extrusion technology, which can extrude products with different textures and tastes out of double- screw extruder at the same time. It can produce a variety of core-filling food which are popular in the market, such as fragrant chicken, core- filling rolls, etc. It can also produce nutritional powder, grain gruel and many other snacks by changing moulds and assistant equipments.
  Contacta ahora
This Single -screw fried wheat flour snack processing line uses wheat flour as raw material which is extruded and shaped by the single- screw extruder. The snack will be in different shapes by changing the moulds, such as pizza rolls, shell, screw, ring, star, chip, stick, etc. After fried and flavored, the final snacks will be crispy and tasty.
  Contacta ahora
Rice crisp processing  Equipment  uses wheat flour as raw material which is extruded and shaped by the single- screw extruder. The snack will be in different shapes by changing the moulds, such as pizza rolls, shell, screw, ring, star, chip, stick, etc.      After fried and flavored, the final snacks will be crispy and tasty.
  Contacta ahora
  The fried snack production line takes wheat flour as the main raw material, and can also be a mixture of corn flour, wheat flour and Rice noodles. By changing the mold and auxiliary equipment, various products can be produced. Such as salad fries, wave slices, salad slices, crispy rice dumplings, etc. The products produced have a crispy and non greasy taste, are rich in nutrients, easy to digest, and are loved by consumers around the world.  Our company's fried snack production line has multiple configurations and can customize different production equipment according to customer needs.
  Contacta ahora
The Fried Puffed Food Production Line Is Suitable For Extruding Flour And Other Raw Materials Through An Extruder, Rolling And Cutting Into Various Shapes Through A Compound Molding Machine, And Then Seasoning After Frying, Making Delicious Snack Foods. The Equipment Design Of The Production Line Is Reasonable And The Operation Is Simple. This Equipment Can Also Produce Products Of Various Shapes Such As Rice Crackers, Triangles, Gourd-Shaped, Small Fish Crisps, Golden Horns And So On. The Product Is Beautiful In Appearance, Crispy In The Mouth, And Rich In Nutrition.
  Contacta ahora
This Single -screw fried wheat flour snack processing line makes use of wheat flour as uncooked fabric that is extruded and fashioned via way of means of the single- screw extruder. The snack might be in distinctive shapes via way of means of converting the moulds, which includes pizza rolls, shell, screw, ring, star, chip, stick, etc. After fried and flavored, the very last snacks might be crispy and tasty.
  Contacta ahora
This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market.
  Contacta ahora
Equipment Introduction Of Snack Products Bugles Shaper:This machine is a supporting equipment of Double screen Snack Production Extruder, which is mainly used for forming and cooling three-dimensional compound extruded food. Materials enter the Snack Products Buckles Shaper from the cooling guide frame for composite.
  Contacta ahora
Slanty Snacks Making Machine uses potato starch, corn starch as main materials to produce a variety of twice extrusion food in different shapes which are popular in the market, such as crispy pea, shell, screw, square tube, round tube, wave, etc. This process line is characterized by unique technics, rational configuration, high automation and stable performance. It can finish steaming, extruding and shaping in one step without a boiler.
  Contacta ahora
This puff snack making gadget can use corn, rice, and different grain powder as uncooked materials to deliver proper away puffed snacks in variou shapes, collectively with chip, ball, ring, stick, flake, flower, and lots of others. after dried and flavroed, the snacks are crispy and attractive which is probably very well-known in the market.
  Contacta ahora
Crumb is especially used for fried beefsteak and bird as frying dressing. this line is in particular designed and developed to perform from the cloth to final shaping automatically with less manpower, without waste,lower production fee, and higher production efficiency.
  Contacta ahora
Tortilla chip process line uses corn powder, corn starch, and rice powder as primary cloth which can be extruded, punched into triangle, spherical, rectangular shapes, and then baked and flavored. such snacks with crispy taste, wealthy nutrition and digestible shape are very popular with many human beings all over the global.
  Contacta ahora
This puff snack making machine can use corn, rice, and other grain powder as uncooked substances to produce immediately puffed snacks in variou shapes, such as chip, ball, ring, stick, flake, flower, and many others. after dried and flavroed, the snacks are crispy and tasty which might be very popular in the marketplace. this puff snack machine is characteristics of simple opeation, reasonable shape, low consumption, and excessive efficiency, which make it the best preference for medium manufacturing unit.Schematic diagram of production line
  Contacta ahora
      The fried wheat flour snack production line is a new technology that replaces traditional cooking Guoba production with twin screw extrusion technology. This production line is a high-quality production line that has been successfully developed and innovated by the company's scientific and technological personnel. It integrates raw material mixing, steaming, ripening, puffing, forming, frying, and seasoning. The production process is simplified, efficient, and environmentally friendly.
  Contacta ahora
This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market. This Puff Snack Machine Is Characteristics Of Simple Opeation, Reasonable Structure, Low Consumption, And High Efficiency, Which Make It The Best Choice For Medium Factory.Schematic diagram of production line
  Contacta ahora
Equipment introduction This machine is a special equipment for pasta products such as pizza rolls. The raw materials used are various starch, flour and potato whole flour. Its characteristics are: the product is beautiful in appearance and delicate in taste. The equipment has reasonable structure, high output, low energy consumption, small footprint, easy operation and maintenance.   technical parameter: Total power: 10.12KWHost power: 7.5KWRotary cutting power: 0.37KWFeeding power: 0.75KWProduction capacity: 70~80㎏/hDimensions: 1700×1000×1800mm
  Contacta ahora
Relate News
In the past, "I know the taste of the sea" once made bagged instant seaweed snacks deeply rooted in the hearts of the people, basically opening a new era of cross-generational development of seafood snacks. With the accelerated development of my country's "deep blue economy" in recent years, the use of new food processing technologies and new processes to vigorously develop marine leisure food in the true sense has become an important direction for the development of the marine product industry. Grilled fish fillets, cod sausages, etc.
For a long time in the past, the impression of dehydrated vegetables was basically vegetable packets in instant noodles. Although its application to the "black technology" used in aerospace food - freezing and dehydrating vegetables technology ensures the flavor and nutrition of vegetables, after all, the supply of fresh vegetables in China is relatively sufficient, and people rarely choose dehydrated vegetables in their daily life. food. However, over the years, this situation has changed.
As October approaches, konjac also ushered in the harvest season. The suitable planting areas of konjac in my country are mainly distributed in the tropical and subtropical humid monsoon climate regions such as the Southeast Mountains, the Yunnan-Guizhou Plateau, and the mountains around the Sichuan Basin.Konjac has been cultivated and eaten in my country for a long time. The processed products of konjac are not limited to the konjac tofu that people often eat in the past. Konjac has been processed into various snacks and snacks, which are deeply loved by consumers.
With the rapid development of the economy and the continuous improvement of people's living standards, the leisure food industry has been growing rapidly, people began to treat potato chips as the best choice to relieve stress and kill time, and increasingly toward the trend of leisure development.For fried snack food, fried processing equipment plays a key role in the production process. Frying equipment can be divided into vacuum frying machine and atmospheric frying machine according to different air pressure.
With the continuous strengthening of the concept of healthy diet of residents, the pursuit of freshness, nutrition and quality of products is getting higher and higher, and the market demand for fresh fruits and vegetables, short-term food, and fresh milk and dairy products continues to increase.
  The fried snack production line takes flour, corn flour, corn starch, cassava starch and potato starch as raw materials, changes different molds, and directly extrudes and shapes them into strip, sheet or triangle shaped composite products through twin-screw extruder. After frying and seasoning, they are made into crisp, delicious and delicate fried puffed food. This production line automatically completes mixing, extrusion molding, and frying and seasoning. Reasonable configuration, high degree of automation, stable performance, and more realistic product design.
Since the beginning of this year, affected by the supply chain, many foreign fast food chains have fallen into a shortage of fried chicken and french fries. On the other hand, the lack of market supply reflects the large demand for frozen fries and other ingredients in the market. As a major producer of potatoes, in the process of developing the potato industry, we should promote the transformation of potato processing products from single to diversified according to market demand and local conditions.
From childhood to adulthood, all kinds of snacks have always been an indispensable part of our daily life. At present, with the "main force" of consumption after the 1990s and 1900s, the leisure snack industry has also undergone tremendous changes, and the scale of the industry has continued to expand.
  The fried wheat flour snack production line is a new technology that replaces traditional steamed food production with twin screw extrusion technology. This production line integrates raw material mixing, steaming, ripening, puffing, shaping, frying, and seasoning. And without the need for boilers, the production process is simplified, efficient, and environmentally friendly. The raw materials can be either single materials such as big Rice noodles, corn flour, flour, or a mixture of these materials.
In the process of using the frying machine, there are some things that we need to pay attention to. This also has a certain role. Each type of frying machine can bring different inspiration to us architects. They use these inspiration to create different frying machines., Make our understanding will be further!Before using the equipment, it is clear that the products to be produced are pasta series, bean products or puffed foods. Different product production processes are different, so this needs to be considered in advance.