Rice Crisp Processing Equipment-manufacture,factory,supplier from China

Rice crisp processing  Equipment  uses wheat flour as raw material which is extruded and shaped by the single- screw extruder. The snack will be in different shapes by changing the moulds, such as pizza rolls, shell, screw, ring, star, chip, stick, etc.      After fried and flavored, the final snacks will be crispy and tasty.

　　The nutritional rice production line takes grains as the main raw materials (corn flour, rice flour, millet flour, flour, etc.), vegetables, fruits, eggs, meat and other selective ingredients, and adds minerals such as calcium, phosphorus, iron and vitamins.

　　　The core filling snack production line developed by our company is an advanced production line, which uses advanced co extrusion technology to extrude two kinds of products with different texture and taste on a twin-screw host at the same time. It can process a variety of raw materials at the same time, such as Rice noodles, syrup, fruit paste, etc., and process them into a variety of sandwich rice fruit products, such as McChicken pieces, cocoa desserts, sandwich rice fruit, maishao, banana crisp, rice fruit, etc.

Introduction to FLS Snack Products Cooling Conveyor Machine:FLS Snack Products Cooling Conveyor Machine is a supporting equipment for the oven, which is used to cool and transport baked materials. This machine adopts stainless steel mesh belt driven by chain to transport materials.

This procedure line is one of the newly advanced double-screw extruding techniques of our corporation. the traditional stir-fry handiwork has low efficient and much less usable raw materials, and its sanitation and great are difficult to control. the double-screw extruding approach makes up those lacknesses. it not handiest can method grain substances, like buckwheat, oats, and many others.

OverviewThis complete set of equipment is widely used, and can fry various foods such as potato chips, shrimp sticks, and rice noodles. This complete set of equipment integrates the functions of frying, oil rejection, and lifting. A series of actions are controlled by PLC centralized automatic control, which makes the control accurate and reliable, greatly improves the production efficiency, and saves a lot of human resources.

Equipment introductionThe dryer is composed of a heating room and a material room. The main equipment includes heating equipment, ventilation and moisture removal equipment, and temperature and humidity control equipment. It has good coordination for the four baking factors (water, fire, wind and time) of the baking environment. In the process of following the laws of nature, the natural properties of the hot and cold air flow are used to promote the natural circulation of the hot air in the drying box.

Tortilla chip way line makes use of corn powder, corn starch, and rice powder as primary cloth which may be extruded, punched into triangle, spherical, square shapes, after which baked and flavored. such snacks with crispy flavor, rich nutrients and digestible shape are very well-known with many humans everywhere inside the world.

device nameDrawing protein production line, tissue protein production line, vegetarian meat production line, vegetarian meat equipment, artificial meat equipmentEquipment introductionDrawing protein and tissue protein production line is a new generation of drawing protein and tissue protein production line developed by Dayi R&D team for decades, through changing formulas, improving processes, and innovating processing methods.

This puff snack making device can use corn, rice, and special grain powder as uncooked materials to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and plenty of others. after dried and flavroed, the snacks are crispy and appealing which is probably very famous in the marketplace.

This puff snack making machine can use corn, rice, and other grain powder as uncooked substances to produce immediately puffed snacks in variou shapes, such as chip, ball, ring, stick, flake, flower, and many others. after dried and flavroed, the snacks are crispy and tasty which might be very popular in the marketplace. this puff snack machine is characteristics of simple opeation, reasonable shape, low consumption, and excessive efficiency, which make it the best preference for medium manufacturing unit.Schematic diagram of production line

This puff snack making machine can use corn, rice, and other grain powder as raw substances to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and lots of others. after dried and flavroed, the snacks are crispy and attractive which might be very famous in the marketplace. this puff snack machine is characteristics of easy opeation, reasonable shape, low intake, and excessive performance, which make it the nice choice for medium production unit.Schematic diagram of production line

Equipment introductionThis machine is a special equipment for drying semi-puffed food. It can dry food blanks of various shapes such as potato chips, French fries, spirals, shells and crisp corners. It has a wide range of applications.This machine uses the combustion chamber for heating, and uses the chain to drag the stainless steel mesh belt for transmission. And it is equipped with an advanced frequency conversion speed regulation system, which can set different transmission speeds according to different materials.

　The artificial rice production line adopts the industry's advanced production and processing technology, and innovatively processes rice flour, wheat flour and nutritious, green and healthy grains that are not easy to process, taste bad, and digest into various artificial composite rice with the same cooking performance and cooking method as ordinary rice through the flexible way of single or multiple raw materials, adding or not adding nutrients. This artificial rice production line green, environmentally friendly, flexible, efficient, low failure rate, and small investment.

Equipment introductionSLG35-A twin-screw extrusion puffing tester is a puffed food equipment suitable for research, teaching and formula research and development, which is developed by using advanced twin-screw extrusion technology and combined with our company's rich experience in puffed food technology research for many years. The characteristics of the equipment are: the screw has self-cleaning function, high efficiency of material pushing, and good shearing and homogenizing effect of material.

This Double-screw fried wheat flour snack processing line uses double screw extruding technique to replace the traditional steam booling process with high efficiency and no pollution without a boiler. The raw material can be total whear flour, or mixing with corn powder, rice powder, or others. By changing the moulds, the products can be in different shapes. After fried and flavored, the final snacks will be crispy and tasty. This line has features of continuous working, stable performance, and reasonable design.Schematic diagram of production line

EQUIPMENT INTRODUCTIONThis equipment is a small food automatic spraying seasoning processing equipment developed by our company based on years of experience in the food market. It can complete the multi-component automatic batching, spraying and seasoning processes of various multi-component puffed snacks and snack products. DEVICE APPLICATION1. The ingredients of puffed snacks are mixed and sprayed for seasoningSecond, the sugar seasoning of peanuts and beans3.

Equipment introductionSLG85-A large-scale twin-screw extruder is a puffed food equipment developed by using foreign advanced twin-screw extrusion technology and combined with our company's rich experience in puffed food technology research for many years.The equipment adopts stable and reliable frequency conversion speed regulation system and precise pressure sensing system, which makes the operation more convenient and accurate. The spiral part adopts a specially designed screw structure such as two co-rotating, double-ended arc grooves and kneading blocks.

Equipment Introduction Of Snack Products Bugles Shaper:This machine is a supporting equipment of Double screen Snack Production Extruder, which is mainly used for forming and cooling three-dimensional compound extruded food. Materials enter the Snack Products Buckles Shaper from the cooling guide frame for composite.

This manner line is one of the newly developed double-screw extruding techniques of our corporation. the conventional stir-fry handiwork has low efficient and much less usable uncooked substances, and its sanitation and fine are difficult to govern. the double-screw extruding method makes up the ones lacknesses. it now not handiest can method grain materials, like buckwheat, oats, etc.

The pet food and aquatic feed production line is a high-end pet food processing equipment developed by Dayi to meet the emerging pet supplies market.  The whole production line has a reasonable design, flexible configuration and strong adaptability.  It can produce crispy pet food, such as dog food, cat food, fish and bird feed, etc., and can also produce single-color or two-color chewing pet food.  MultipurposeThis production line uses the unique twin-screw extruding extrusion technology of Dayi to make the product incision smoother and the shape more realistic.  At t

　　The nutritional rice production line uses Rice noodles as the main raw material, which can be selectively filled with various vitamins and minerals as required. The shape of the rice grains is extruded by the twin-screw extruder, and then dried to the required moisture. It can be eaten after cooking for about 10 minutes. The nutritional rice artificial rice production line endows rice with unique shapes, flavors, and colors, and adapts to the constantly developing market for health and wellness foods with scientific nutritional ratios and easy digestion.

Equipment introduction:SLG65—C type double-screw extruder technical parametersScrew diameter: Φ65mmScrew speed: 0～250rpmzProcessing capacity: 80～120kg/hTemperature control range: 0～399cMotor power: 22kwMachine center height: 1020mmDimensions: 2400×960×1800mmSLG65-C type double-screw puffing machine is a puffing food equipment suitable for my country’s national conditions, developed by using the international advanced double-screw extrusion puffing technology, combined with our company’s rich experience in puffed food technology research for many years.Host FeaturesThe host adopts a stable and

Overview:The equipment is reasonable in design, easy to operate, and low in price. It is also equipped with a chassis for placing the receiving box and discharging conveying.