Screw Snacks Making Machinery-manufacture,factory,supplier from China

When using a twin-screw extruder, the twin-screw extruder needs to install the device correctly, so that it can save energy and time during production.The twin-screw extruder is fully automated from batching, extrusion, puffing, molding, core sandwiching, cutting, spraying to finished products at one time. The production line has the characteristics of many optional models, flexible equipment configuration, wide range of raw materials, many types of products, and simple operation.

There are many kinds of raw materials and products in the food industry, and the processing technology is different, so the mechanical equipment of food enterprises is also very complicated.Raw material processing machinery: including decontamination, cleaning, selection and other mechanical equipment.Crushing and cutting, dividing machinery: including crushing, crushing, grinding, dividing, cutting and other mechanical equipment.Mixing machinery: including powder mixing machinery and equipment.Sorting machinery: refers to the sorting machinery of powder and block materials.Molding machinery:

As October approaches, konjac also ushered in the harvest season. The suitable planting areas of konjac in my country are mainly distributed in the tropical and subtropical humid monsoon climate regions such as the Southeast Mountains, the Yunnan-Guizhou Plateau, and the mountains around the Sichuan Basin.Konjac has been cultivated and eaten in my country for a long time. The processed products of konjac are not limited to the konjac tofu that people often eat in the past. Konjac has been processed into various snacks and snacks, which are deeply loved by consumers.

In the past, "I know the taste of the sea" once made bagged instant seaweed snacks deeply rooted in the hearts of the people, basically opening a new era of cross-generational development of seafood snacks. With the accelerated development of my country's "deep blue economy" in recent years, the use of new food processing technologies and new processes to vigorously develop marine leisure food in the true sense has become an important direction for the development of the marine product industry. Grilled fish fillets, cod sausages, etc.

After the processing of stirring machinery, it is necessary to carry out the shaping process, and there are many kinds of food shaping machinery, with different functions. According to different forming principles, food forming mainly has the following six methods.(1) The production of stuffing, such as bean buns, pies, dumplings, wontons and spring rolls.

Now puffed food has always been very popular, and many companies and businessmen have seen the profits. In fact, puffed food machinery is the same as food machinery, not only to meet the production conditions that the machinery and equipment should have, but also to meet the various conditions required for food processing. Judging from the current development phenomenon, the procurement of extrusion and puffing machinery should be considered from four aspects.1. Scale applicability.

Nowadays, many food industries have been constantly upgrading. In fact, most food processing plants have upgraded machinery and technology. With the continuous upgrading of food machinery and the expansion of intelligent production lines, the productivity and competitiveness of products have been improved.

Food machinery refers to the mechanical equipment and devices used in the process of processing food raw materials into food (or semi-finished products).

Twin screw extruder is developed on the basis of single screw extruder. Two screws are placed side by side in the barrel of the twin screw extruder. According to the meshing degree of the two screws can be divided into mutual meshing type and non-meshing type. According to the rotation direction of the two screw shafts, it can be divided into reverse rotation type and co-rotation type.(1) meshing twin screw: Because the meshing gap of the meshing screw is very small, the material has the ability of forced conveying, not easy to produce backflow, leakage phenomenon.

There is only one screw in the barrel of the single screw extruder, it is by the friction of the screw and the barrel of the material to transport materials and form a certain pressure. In general, the friction coefficient between the material and the barrel is greater than that between the material and the screw. Otherwise, the material will be wrapped in the screw together to rotate and not play the role of forward propulsion.Screw is divided into three sections: feeding (feeding) conveying section, compression melting section, metering homogenization section.